كتالوج المنتجات

كتالوج المنتجات

I.G.M series Gas Thrust Furnaces

  • I.G.M. series furnaces complete the series range and distinguish for the very high thermic potential, ensuring very high hours production with the best heating quality. Produced in 3 or 4 tracks version, I.G.M. furnaces are designed to allow high productivity also in presence of extremely limited room available. The evolution trend in hot forging has stimulated perfectioning of quality features of furnaces in terms of temperature uniformity and production velocity. The answer to these requirements is realized by this series of furnaces thanks to the use of sophisticated temperature detection and regulation systems. I.G.M. furnaces have been designed to feed new generation press machines for automatic stamping of one, two or four figures.

    Availability of wide number of optionals, according to specific product requirements. These distinguish for their extreme use versatility and conduction simplicity. Designed to allow maximum productivity with minimum overall dimension, these solve more and present needs of limitation in available room with increased quantity produced. These are suitable for precision heating of huge quantity of small, medium and large parts (maximum weight: 8 kilos/part).

    Temperature regulation by proportional modulating action, allow ing temperature uniformity to be +/- 0.5% of preset value. Check up by thermocouple for entrance and central zones; by optical pyrometer for the exit zone. Direct heating by burners on the heating chamber vault and flame on tracks. Tracks stand on steel rods, non directly on refractory; these determines a more uniform heat transfer on tracks: less oxidation of the parts, preservation of graphite features (if used), less bending and longer lasting f tracks, easiness in cleaning the heating chamber hearth.

    Six combustion chamber lengths are available: IGM2600 (2 zones) and from IGM3200 to IGM5100 (3 zones). where the model number states the length in mm. The chamber is provided with 3 Tracks having 120 mm wheelbase (pieces diam. 25-100 mm) or 4 tracks having wheelbase 80 mm (pieces diam. 25-60). Feeder/In-column device A1600 (pieces L.350).

    Electrical switchboard and operator panel, both at the machine edge, included. Feed logics by PLC. Temperature regulation by microchip thermoregurator.
    • Features
    • Suitable for continuous stamping of 1, 2 or 4 pieces (4G) and 1, 2 or 3 pieces (3G). Internal moving on 3 or 4 tracks made by refractory steel. Temperature regulation by microchip, with detection by thermocouple and optical promoter. Temperature setting by PLC and visual display.
    • Pieces example
    • Example of parts: Billets diameter from 15 to 60 mm, length from 25 to 300 mm.
    • Optionals
    • Among the main ones, we indicate: optical pyrometer, display on operator panel, soundproof cabin, integrated low emptying device, mount-piece for loading tank, unloading conveyors in all combination, scrap parts device.
    • Tag
    • brass pieces, Copper pieces, Hot stamping, Boost ovens
    • Range and combinations
    • In-column device type A1600-tracks wheelbase 3G120, 4G80- Chamber from IGM2600 to IGM5100.