N.O. series furnaces.

The new range of furnaces, N.O. series offers come technical improvements to perfect functioning. It is built up to respond to growing demand for pre-formed parts, squares and discs heaving having huge size.
Huge number of optionals available, according to specific production needs.

N.E. series furnaces. The new furnaces product range, N.E. SERIES, performs the same heating quality as N.O. SERIES, having the advantages of lining - up device used for Thrust Series. It is built up to respond to growing demand for pre-formed parts, squares and discs heaving having huge size.
Huge number of optionals available, according to specific production needs.

The Gas Belt Furnaces IGT SERIES, dedicated to heating for forging and stamping aluminum, are stand out for their high quality and versatility of performance. The uniformity of the temperature, essential condition in the molding of light alloys, is obtained with the indirect transfer of heat through the conveyance of hot air on the piece conveyor belt.

The handling of the pieces inside the heating chamber takes place by means of a belt of stainless steel mounted on a removable structure to facilitate maintenance. The group of handling protrudes from the chamber to allow manual loading of the pieces.

The belt (patent pending) is entirely built in AISI310 steel guarantees stability of temperature with strong energy saving and long service life. The carpet can be completely extracted from the machine body allowing easy maintenance and cleaning. Modulating proportional action temperature regulation. Multiple detection on each single zone via thermocouple. Indirect heating with high thermal power burners.

Different chamber lengths are available and can be equipped with belts from 400 to 1000 mm according to production needs.

It includes an electrical panel and an operator panel on the machine.

Progress logic a PLC.
Temperature regulation by means of a microprocessor thermoregulator.
Independent burner boxes placed near each single burner with ignition and flame detection equipment.

I.G.M. series furnaces complete the series range and distinguish for the very high thermic potential, ensuring very high hours production with the best heating quality. Produced in 3 or 4 tracks version, I.G.M. furnaces are designed to allow high productivity also in presence of extremely limited room available. The evolution trend in hot forging has stimulated perfectioning of quality features of furnaces in terms of temperature uniformity and production velocity. The answer to these requirements is realized by this series of furnaces thanks to the use of sophisticated temperature detection and regulation systems. I.G.M. furnaces have been designed to feed new generation press machines for automatic stamping of one, two or four figures.

Availability of wide number of optionals, according to specific product requirements. These distinguish for their extreme use versatility and conduction simplicity. Designed to allow maximum productivity with minimum overall dimension, these solve more and present needs of limitation in available room with increased quantity produced. These are suitable for precision heating of huge quantity of small, medium and large parts (maximum weight: 8 kilos/part).

Temperature regulation by proportional modulating action, allow ing temperature uniformity to be +/- 0.5% of preset value. Check up by thermocouple for entrance and central zones; by optical pyrometer for the exit zone. Direct heating by burners on the heating chamber vault and flame on tracks. Tracks stand on steel rods, non directly on refractory; these determines a more uniform heat transfer on tracks: less oxidation of the parts, preservation of graphite features (if used), less bending and longer lasting f tracks, easiness in cleaning the heating chamber hearth.

Six combustion chamber lengths are available: IGM2600 (2 zones) and from IGM3200 to IGM5100 (3 zones). where the model number states the length in mm. The chamber is provided with 3 Tracks having 120 mm wheelbase (pieces diam. 25-100 mm) or 4 tracks having wheelbase 80 mm (pieces diam. 25-60). Feeder/In-column device A1600 (pieces L.350).

Electrical switchboard and operator panel, both at the machine edge, included. Feed logics by PLC. Temperature regulation by microchip thermoregurator.

Products exclusively in the 4-guiding version, ovens I.G.Q. Sleep designed to allow high productivity even in the presence of extremely small space.

I.G.O. series furnaces Great use versatility, functionality and reliability are the main featured of wide and differentiated range, designed to stamp a single parto arm two parts simultaneously. These furnaces have been designed to allow high productivity.also with extremely limited room available.

Availability of a huge number of optionals for specific production requirements.

Designed to allow maximum productivity with minimum overall dimension, these solve more and more present needs of limitation in available room with increased quantity produced.

Temperature regulation by proportional modulating action, allow ing temperature uniformity to be +/+ 0.5% of preset value. Check up by thermocouple on one or two zone, according to heating chamber length. Direct heating by burners on the heating chamber vault and flame on tracks.

In 2G version, tracks wheelbase is 80 mm (parts diam. 15-60mm) or 120 mm (parts dial, 15-80 mm). in 3G version wheelbase is 75 mm (parts diam. 15-60 mm§); in 4G it is 50 mm (parts dial. 15-45 mm).
Four chamber lengths are available: IGO2000, IGO2500 (1 zone) and IGO3000, IGO300 (2 zones), where model number states length in mm. Every chamber can be provider by 2, 3 or 4 tracks according to required production and size of parts to be heated.

Feeder/In-column device A1300(pieces length 200 mm) A1600 (pieces length 300 mm).

Electrical switchboard and operator panel beside the machine included. Feed logics by electromechanical relays or PLC. Temperature regulation by microchip thermoregulator.