FARMBRASS AND INDUCTION IGE Furnaces

Fhe INDUCTION heating system guarantees effective heating of all billets.

The Induction furnace is fully automatic in the functions of loading, advancing and unloading towards the press and arranged for synchronism with the press for automatic molding.

The system is characterized by the high versatility and productivity of the parts to be heated, all with an extremely accurate design in order to maximize performance while taking up minimal space.

The whole system: inductors, power supply, water tank, heat exchanger are fixed on a special platform with leveling feet, all of which can be lifted with a forklift or overhead crane. All this to make transport and positioning easier.

The oven is equipped with 2 inductors always connected to the cooling system. By means of two tracks it is possible to manually move the inductors thus making the production change very fast. As regards the electrical connection, simply disconnect the 3 power terminals and reconnect them after changing the position of the inductor, which is necessary for the new type of product to be heated.

It is possible to apply a third inductor with positioning pin and “optional” air contactors.

The billets slide inside the inductor on a steel base suitable for the sliding of the material to be heated.

For the double feeding of billets to the press, a pneumatic sorting system will be applied at the outlet of the inductor. The management takes place through the PLC and in the case of a single piece mold, the device is positioned in the point where the gripping hand picks up the hot piece.

The heating area is controlled by an optical pyrometer which directly detects the temperature on the outgoing piece. The detection signals are communicated in milliseconds to the temperature modulation board, which allows temperatures to be reached and maintained.

In addition to manual operation, the system is equipped with an industrial PC that allows you to view the operating parameters of the oven, program the heating temperature, set temperature alarms and memorize the heating characteristics.

A diffuse industrial PC for setting the temperature, type of inductor to be used, material advancement times and sorter handling, recording temperature diagrams, setting recipes and compiling work cycle reports, integrated remote assistance via connection to your internet network.

Data storage: It is possible to store and code the parameters used for the treatment of all the pieces. This option is particularly functional if a repetition of details is required.

By storing all the data relating to the treatment of a particular, it is possible to create and code recipes, which can be reused when the particular to be treated reappears.

Possibility to obtain a report of heating temperatures and part temperatures.